What to do if Mokon Duratherm Control Systems displays E.Lin error?
If the Mokon Control Systems unit displays the E.Lin error, it indicates an invalid input type, potentially due to incorrect or corrupted custom linearization. To resolve this, access the INPUT list within the configuration level and select a valid thermocouple or input type.
Why does my Mokon Duratherm show E.ConF error and how to fix it?
The E.ConF error on your Mokon Control Systems unit occurs when the device is powered off before a parameter change is fully entered. To fix this, enter configuration mode and then return to the operating mode you need. You might have to re-enter the parameter change because it probably wasn't saved before.
How to fix E.CAL error on Mokon Duratherm?
To address the E.CAL error on Mokon Control Systems, reinstate the factory calibration.
General| Brand | Mokon |
|---|---|
| Model | Duratherm |
| Category | Control Systems |
| Language | English |
Essential safety guidelines for electrical connections and handling of equipment.
Safety precautions regarding high-temperature fluids and system components.
Critical instructions for ensuring fluid flow for system safety and proper operation.
Detailed instructions for safe and compliant electrical hook-up of the system.
Procedures and cautions for connecting supply, process, and drain water lines.
Step-by-step guide for powering up and starting the temperature control system.
How to determine and set the correct water flow rate for optimal system performance.
Safe procedures for powering down the system, emphasizing cooling before shutdown.
Routine checks and procedures to ensure long-term, trouble-free system operation.
Detailed guide for maintaining and servicing the system's pump, including exploded views.
Instructions for servicing and replacing the heater bundle and associated components.
Information on the emergency stop button's function and safety limitations.
Explanation of model code structure for Duratherm series, including pump, capacity, and controller.
Explanation of model code structure for Minitherm series, including voltage and controller type.
Explanation of model code structure for Hydrotherm II series, including pump style and kW capacity.
To Next Page