10
Press MENU to select, use the UP/DOWN button ▲▼ to select on
or off. As the status changes, the backlight will activate accordingly.
OFF
BKLIT
Press MENU to save and exit back to the main menu.
5.7 DECPT (Decimal Point)
Set the number of decimal places to display. When the display shows:
SEtUP
DECPT
Press MENU to select, use the UP/DOWN button ▲▼ to select none,
1 or 2.
nonE
DECPT
Press MENU to save and exit back to the main menu or press ◄ to
return to the main menu without saving. The unit will indicate DONE
when the value has been changed.
5.8 INPUT (Input Pulse Polarity)
Set the active edge of the input pulse. When the display shows:
SEtUP
INPUT
Press MENU to select, use the UP/DOWN button ▲▼ to select
NEGative or POSitive.
nEg
EDGE
Press MENU to save and exit back to the main menu or press ◄ to
return to the main menu without saving. The unit will indicate DONE
when the value has been changed.
At the MAIN MENU press the LEFT ◄ button to exit to the operational
condition.