SCH2 Technical Manual TSP016.doc Issue 3.0 – January 2005
Money Controls 2005. All rights reserved.
Page 13 of 61
10. ccTalk Design Parameters
Refer to issue 4.2 of the ‘cctalk Serial Communication Protocol / Generic Specification’ for an
explanation of the protocol and its implementation on any platform.
This product is configured as…
cctalk b96.p0.v24.a5.d0.c8.m0.x8.i1.r3
In other words…
9600 baud / open-collector interface / +24V supply / +5V data /
supply sink / connector type 8 / slave device / 8-bit checksum /
implementation level 1 / spec. issue 3
The hopper can only operate at 9600 baud.
To Next Page
Loading...
