SCH2 Technical Manual TSP016.doc Issue 3.0 – January 2005
Money Controls 2005. All rights reserved.
Page 58 of 61
Dispense 10 coins in multi-coin mode
Only 3 coins in hopper
Hopper status = 01 0A 00 00
Hopper status = 01 09 01 00
Hopper status = 01 08 02 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 07 03 00
Hopper status = 01 01 02 07 Partial result - ignore
Hopper status = 01 00 03 07 Paid 3 coins, 7 remaining
The partial result takes the following form…
[ payout coins remaining ] Î 1
[ last payout : coins paid ] Î 1 less than final value
[ last payout : coins unpaid ] Î correct value
If host machine software is displaying the number of coins paid then there are 2 solutions to the
partial result problem.
a) Display [ coins requested ] - [ payout coins remaining ]
b) Compare [ last payout : coins paid ] with last value and only display if greater
To Next Page
Loading...
