NAV/ANC
COURTESY
STEREO
HEATERACC
BILGE
COURTESY LIGHT SWITCH
The Courtesy switch supplies power to the
lighting throughout the boat.
BILGE PUMP SWITCH
The Bilge Pump switch operates in two
positions. The manual position is used to verify
that the pump is operational.
The automatic pump function is engaged at all
other times so that any excess water in the
bilge may automatically be pumped out.
STEREO SWITCH
The Stereo switch supplies power to the stereo
unit. The switch must be turned on before the
stereo can be played.
ACCESSORY SWITCH (2 POSITIONS)
The Accessory switch supplies power to an
extra circuit for accessories that may be added.
NOTICE
If any lights, bilge, stereo,
courtesy lights, or accessories fail
to operate, press the appropriate
circuit breaker located under the
switch.
HEATER SWITCH
The Heater switch supplies power to the heater.
NAVIGATION LIGHTS SWITCH
The Navigation Light switch supplies power to
the Bow Light, the Stern Light and the Pole
Light.
Operation (Refer to Illustration Below):
When underway during night time operation,
set the switch in the NAV position to activate all
of the running lights.
When docked or at anchor, set the switch, in
the ANC position to activate only the pole light.
Switch configuration may vary slightly based on options.
If you have any questions regarding operation, please
contact your dealer or Skier's Choice, Inc.
NAV Lights
ANC Lights
To Next Page
Loading...
Need help?
General
