40
© 2014 Skier’s Choice, Inc.
The optional ballast system also includes an in-line water
strainer before the manifold. This strainer will keep debris out
of the solenoid valve and should prevent the valve from getting
clogged up and forced open. The strainer cover should be
removed periodically and the lter screen cleaned to prevent
debris buildup on the mesh screen. Be careful when removing
the cover not to lose the O-ring used to seal the cover. Also, the
strainer should be removed and drained during winterization.
To ll the ballast system, press the ll switch. To empty, press
the empty switch. With the ballast full, the boat may porpoise
at speeds above 25 mph.
Empty ballast before trailering the boat. DO NOT trailer
boat with ballast full!
ballasT WaTeR sTRaIneR
To Next Page
Loading...
Need help?
General
