2014 Ballast Trouble Shooting Guide
Problem Possible Cause Action Correction
Ballast power wires not
connected to battery
Check ballast power wires
at battery
Connect power wires to battery
Ballast breaker is tripped Check 60 amp ballast breaker
inside the engine compartment
Reset ballast breaker at battery
System needs reset Check power to all areas Turn power o to the system at the breaker
and then back on and retry
Pump turns on, but does
not pump water
Pump not priming (1) Water intake ball valves are not
open
(2) Kink in hose
(3) Worn Impeller
(1) Open ball valves
(2) Check hoses for kinks and straighten
as needed
(3) Check hose connections and tighten if
loose.
(4) Replace Impeller
Pump will not turn on
Pump will not turn on
Pump will not turn on