46
© 2014 Skier’s Choice, Inc.
Be sure that all bolts are tightly in place before
use.
Be aware of and avoid low overhead objects
such as bridges, power lines, overhanging
trees, etc.
To loWeR ToWeR foR sToRage:
Remove the two hand knobs from the back edge
of the base of the tower leg. The hand knobs will
stay connected to the tower leg. Lower the tower
downward into the boat.
The tower must be supported when hand knobs are removed, or the tower can fall into the boat injuring passengers or
damaging the boat.
To RaIse ToWeR:
Lift the tower and tighten the hand knob to secure the tower in the upright position.
The threads in the tower base could be damaged if the bolts are not aligned and threaded correctly.
oZ HD ToWeR
Some Moomba models are equipped with an optional Moomba Oz HD towing tower. The tower is designed with practicality,
aesthetics, and the consumer in mind. 23/8 in. tubing is used to provide additional strength and stability to enhance the
performance and functionality of the tower. The larger diameter tubing also allows for the possibility of four wakeboard/
surfboard racks to be mounted (two on port side, two on starboard side). The fold assist feature make it easier to raise or lower
the tower (two individuals working together is recommended). The optional Moomba Oz HD towing tower is NOT intended
to be used to tow skiers, barefooters, tubes, or multiple wakeboarders. Such use will void any warranties written or implied.
Fold Assist Option
See your dealer to set when accessories are added to the
tower.
To Next Page
Loading...
Need help?
General
