330A Nēo Series
6
Introduction
Thank you for selecting the Nēo 330A Power Amplifier
as a part of your hi-fi reproduction system. This power
amplifier has been designed to offer state-of-the-art
high-end performance in an elegant package, while
retaining all the sonic hallmarks on which Simaudio has
made its reputation. We have spared no effort to
ensure that it is among the finest two-channel
amplifiers available. We have been building high-
performance audio equipment for over 30 years, and
the know-how gained through our cumulative
experience is an important reason why MOON
amplifiers are so musically satisfying.
The performance of your 330A will continue to improve
during the first 300 hours of listening. This is the result
of a “break-in” period required for the numerous high
quality electronic parts used throughout this amplifier.
Before setting up your new Nēo 330A, we encourage
you to please read this manual thoroughly to properly
acquaint yourself with its features. We hope you enjoy
listening to the Nēo 330A Power Amplifier as much as
the pride we have taken in creating this fine audio
product. We understand the power and emotion of
music and build our products with the goal of faithfully
capturing these elusive qualities.
The information contained in this manual is subject to
change without notice. The most current version of this
manual is available on our official website at
http://www.simaudio.com
Your Nēo 330A Power Amplifier incorporates many
significant design features to achieve its “world-class”
level of performance. This is an abbreviated list of the
more important features:
Proprietary “Advanced Rennaisance” Technology
which eliminates feedback. The results are: Real-time
amplification, more accurate musical reproduction and
the elimination of transient intermodulation distortion.
Balanced differential circuitry.
Proprietary MOON Bipolar Output transistors with
unprecedented gain linearity resulting in improved bass
response and even more accurate sonic reproduction.
Class A output to 5 watts for greater efficiency.
An exceptionally short signal path for a faster
transient response.
A high damping factor which yields superior musical
dynamics, improved signal speed and refined timbre
accuracy.
RS-232 port for i) full unsolicited bidirectional feedback
in custom installation setups and ii) firmware updates.
12 Volt Trigger input and output.
Rigid chassis construction to minimize the effects of
external vibrations.
Designed to be powered up at all times for optimal
performance.
Low operating temperature for an ultra-long life
expectancy.
To Next Page
Loading...
