Owner’s Manual
7
Unpacking
The Nēo 330A power amplifier should be removed from its box with care.
The following accessories should be included inside the box with your amplifier:
9
AC power cable
9
This owner’s manual
9
Warranty and product registration information (USA and Canada only)
Once the Nēo 330A is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required to
transport this product. The customized packaging is specially designed to protect the 330A from any potential
damage during transit.
Please write the serial number of your new Nēo 330A in the space provided below for future reference.
Serial Number
Installation & Placement
The Nēo 330A Power Amplifier requires reasonable
ventilation to maintain an optimum and consistent
operating temperature, especially since it will radiate
heat when driven hard. Consequently, it should be
placed in a location with empty space around it for
proper heat dissipation. You should never place another
component on top of this power amplifier. As well, it
should be placed on a solid level surface. You should
avoid placing it near a heat source or inside a closed
cabinet that is not well ventilated as this could
compromise the amplifier’s performance and reliability.
The 330A uses a large toroidal transformer in its power
supply; even though it is well shielded, you should not
place this power amplifier too close to source
components sensitive to EMI, such as turntables, phono
preamplifiers and CD Players. Finally, you should never
place another component directly on top of this power
amplifier.
To Next Page
Loading...
