13 02/02
SAFETY OPERATION
IMPORTANT SAFETY INFORMATION!
For Owners and Operators of Morbark
Brush Chippers.
This special safety manual has been prepared
for all owners and operators of Morbark
hand-fed brush and tree chippers.
SAFETY IS NO ACCIDENT.
Like all good things worth having, proper
safety training and operating procedures
require effort, commitment and concentration
every minute of every day.
Accidents don't just happen. They are caused
by people who make mistakes.
We strongly encourage you to review this
information immediately with all employees
working with and around your hand-fed brush
chipper.
It is also imperative to review this information
with any new employees BEFORE they work
with the chipper.
We urge you to review these safety proce-
dures with your employees on a regular basis
throughout the year. Safety training is not a
one-shot affair. It requires your continuous
commitment.
Over the life of the chipper, it is not unusual
to have as many as 20 or 30 different opera-
tors. Even though we are aware of very few
accidents, we are concerned that some
operators may not receive all the proper
training.
As a manufacturer, we design the safest
machine possible and make every effort to
protect the operator from harm.
For a safe and productive operation, follow the procedures discussed in this section. Safety guide-
lines are written in bold print. All personnel must observe these guidelines when working with the
equipment.
To Next Page
Loading...