30 02/02
ROUTINE MAINTENANCE SCHEDULE
NOTE: During the first hours of operation, check belt tightness frequently. After the first week,
check tightness of belts and bolts weekly. Please refer to torque schedule.
GENERAL EVERY 8 HRS WEEKLY
Check engine oil level X
Check radiator fluid level (if applicable) X
Check hydraulic fluid X
Check clutch engagement torque X
Check tightness of engine bolts* X
Check tire pressure before moving machine
Replace engine air, fuel and oil filters refer to engine manual
CHIPPER
Check sharpness of knives X
Check tightness of 5/8"-11 chipper bearing bolts* X
Check tightness of 3/4"-16 chipper knife bolts* X
Check for proper anvil clearance every time you check chipper knives
Check for worn anvil edge X
Check for proper drive belt tension X
Check tightness of chipper sheave bushing* X
Torque chipper drive sheave* X
* Refer to torque specifications. (See page 37.)
To Next Page
Loading...
