31 02/02
ROUTINE MAINTENANCE
Safety and daily maintenance are the two most important things to remember when operating machin-
ery. A small amount of daily maintenance will make the weekly or monthly maintenance much easier
and less expensive. While maintaining your brush chipper, please follow the safety guidelines which are
written in bold print.
ALWAYS REMOVE THE IGNITION
KEY, LOCK OUT THE ENGINE PANEL,
DISENGAGE THE CLUTCH AND IN-
STALL THE DRUM LOCK PIN BE-
FORE ATTEMPTING ANY MAINTE-
NANCE.
DO NOT, UNDER ANY CIRCUM-
STANCES, OPEN THE CHIPPER HOUS-
ING WITHOUT FIRST MAKING SURE
THE CHIPPER DRUM HAS COME TO
A COMPLETE STOP AND THE POWER
UNIT IS OFF.
Because of the high temperature of the
coolant, use caution when removing radia-
tor cap.
Always shut off the machine before refuel-
ing.
Do not smoke, weld, or use any type of
flame near the machine when refueling.
Always wear appropriate clothing and
safety equipment while maintaining your
machine.
Always wear leather gloves when changing
or servicing chipper knife.
Always replace all safety guards after
servicing your machine.
Always make sure all filler plugs and caps
are in place after servicing.
When starting power unit indoors, make
sure the area is properly ventilated.
Do not attempt to unplug the chipper
infeed spout while the chipper is running.
To Next Page
Loading...
