Morbark 1415 - Page 145

-47-
Troubleshooting
Hydtrbl.eps
2/22/94
Loose, Bent or Broken
Brake Components
Underadjustment
Out-of-Round Drums
Replace Components
Adjust
Machine or Replace
Locking Brakes
Incorrect Tire
Pressure
Restricted Brake
Lines or Hoses
Malfunctioning Cylinder
Assembly
Defective or Damaged
Shoe and Lining
Blocked Master
Cylinder
Parking Brake
Cable Frozen
Unmatched Tires
on Same Axle
One Side
Out-of-Adjustment
Improper Lining
Thickness or Location
Inflate Evenly on Both
Sides to Req. Pressures
Match Tires on Axle
Repair or Replace
Install New Shoe and
Lining-Complete Axle
Adjust
Replace Rubber Parts
Fill with DOT4 Fluid
Open with Compressed
Air or Replace Cylinder
Free Cable
and Lubricate
Install New Shoes
and Linings
Pulls to One Side
Improper Fluid
Dragging
Check for Stuck
or Sluggish Pistons
SYMPTOM
CAUSES REMEDIES
Lack of Lubrication
Broken Brake
Components
Incorrect Brake
Components
Adjust
Lubricate
Replace Components
Correct
Underadjustment
Noisy Brakes
Braking Systems - Hydraulic