Morbark 1415 - Troubleshooting Chart - Hydraulic

-46-
Troubleshooting
Broken or Kinked
Brake Line
Malfunctioning
Actuation System
Brake Adjustment
Not Correct
Excessively Worn
Brake Linings
Grease or Fluid
Soaked Lining
Glazed Lining
Excessive Drum Wear
Severe
Underadjustment
Incorrect Lining
Trapped Air in Lines
Overloaded Trailer
Repair or Replace
Adjust Brakes
Troubleshoot System
Replace Shoe
and Lining
Install Correct
Shoe and Lining
Repair Grease Seal or
Wheel Cylinder. Install
New Shoe and Lining.
Recondition or Replace
All Cylinders, Brake Fluid
Reburnish or Replace
Replace
Bleed System
Correct
No Brakes
Weak Brakes
Frozen Master Cylinder
or Wheel Cylinder Pistons
Manual-Adjust Brakes
Automatic-Make Several
Reverse Stops
SYMPTOM
CAUSES REMEDIES
Malfunctioning
Actuating System
Troubleshoot
System
Grease or Fluid
on Linings
Replace Shoes
and Linings
Manual-Adjust Brakes
Automatic-Make Several
Reverse Stops
Harsh Brakes
Brake Adjustment
Not Correct
Machine or Replace
Surging Brakes
Grease or Oil
on Linings
Out of Round Drums or
Cracked Drums
Clean or Replace
Braking Systems - Hydraulic