mori seiki MSX-701IV User Manual

69
归零操作
ZERO RETURN OPERATION
2. 设置快进倍率开关和进给倍率为非 0% 值。 2. Set the rapid traverse rate override switch and the feedrate
override switch to a value other than 0%.
若任一开关设置为 0% ，则轴不移动。 The axis does not move if either switch is set to 0%.
1•“B 轴归零操作 ” （ 221 页） 1•“B-Axis Zero Return Operation” (page 221)
• “C 轴归零操作 ” （ 225 页） • “C-Axis Zero Return Operation” (page 225)

mori seiki MSX-701IV Specifications

General

Brand	mori seiki
Model	MSX-701IV
Category	Lathe
Language	English