Morooka MST-800VD - Tools and Tightening Torques; Introduction of Necessary Tools

3-8
4. TOOLS AND TIGHTENING TORQUES
4.1 INTRODUCTION OF NECESSARY TOOLS
The following tools are needed when carrying out maintenance.
If the tools are broken or worn, please order new tools from your distributor.
No.
Name of tool
Part No.
Remarks
1
Wrench set
0-9100-00000
Width across flats (S1 x S2)
0-9100-00709
7mm x 9mm
0-9100-00810
8mm x 10mm
0-9100-01113
11mm x 13mm
0-9100-01214
12mm x 14mm
0-9100-01719
17mm x 19mm
0-9100-02224
22mm x 24mm
2
Wrench
0-9105-04600
Width across flats 46mm
3
Screw driver (+)
0-9210-00150
4
Screw driver (-)
0-9200-00200