2-40
3.7 STOPPING MACHINE
• Avoid stopping suddenly. Always leave room to spare when stopping.
• Never use the parking brake to stop the machine. Using the parking brake will cause the machine to stop
suddenly and will also damage the machine.
• When stopping the machine, return the left and right travel levers at the same time to the N position.
If the left and right levers are not operated at the same time, there is danger that the brakes will pull to one side.
• When stopping, do not return the travel lever past the N position. If the travel lever is moved past the N position, it
will cause failures such as reverse rotation of the engine.
Return the left and right travel levers to the N position.
The hydraulic brake is automatically applied and the machine will stop.
3.8 EMERGENCY STOPPING MACHINE
If a dangerous state occurs by any possibility, and when it becomes necessary to stop the machine urgently,
press the parking brake switch to set it to the ON (STOP) position or turn the engine starting switch to the OFF
position to stop the engine.
There are following 2 methods when making an emergency stop of the
machine.
• Push in the parking brake switch to apply the parking brake.
• Turn back the starting switch key to the OFF position to stop the engine.
To Next Page
Loading...