2-41
3.9 PARKING MACHINE
Choose firm, level ground to park the machine.
If the machine must be parked on the slope, apply the parking brake and block the tracks to prevent the machine
from moving.
Set the parking brake switch to the ON (STOP) position to apply the parking
brake.
Check that the parking brake lamp on the instrument panel lights up and that
the parking brake buzzer sounds.
3.10 STOPPING ENGINE
• Do not stop the engine before it has properly cooled down. Stopping the machine before it cools down will
shorten the service life of the engine.
Never stop the engine suddenly except in emergency.
• If the engine has overheated, do not stop it suddenly. Run the engine at a mid-range speed and gradually cool it
down before stopping the engine.
1. Push the throttle lever to the front to reduce the engine speed and run the
engine at idling for 5 minutes to cool the engine down.
2. Return the key in the starting switch to the OFF position.
To Next Page
Loading...