When washing the machine, do not spray water on the electrical
components.
If water gets into the electrical system, it will cause defective
operations which may lead to malfunctions.
Cover the following parts with a sheet to prevent water from getting
on them.
• Instrument panel and control panel, switches, sensors, connectors
• Starting motor, alternator, sensors, connectors around the engine
• Battery, relay, connectors at front right of machine
• When draining and changing the oil, always put a container under
the engine and tank to catch the oil.
• Do not drain the oil directly into the ground or throw it into rivers or
the sewage system.
• When disposing of oil, fuel, coolant, solvent, filters, batteries, and
other harmful objects, always use a suitable method or procedure.
To Next Page
Loading...