Morooka MST-800VD - Page 5

A-3
ITEM
Page
10. Handling battery
2-55
10.1 Precautions when handling battery
2-55
10.2 Removal and installation of battery
2-56
10.3 Precautions when charging battery
2-56
10.4 Starting engine with booster cable
2-57
11. Troubleshooting
2-58
11.1 Problems with engine related parts
2-58
11.2 Problems with chassis related parts
2-59
11.3 Problems with electric related parts
2-60
MAINTENANCE
3- 1
1. Basic outline of maintenance
3- 2
2. Precautions for maintenance
3- 4
3. Use of fuel and lubricants according to ambient temperature
3- 6
3.1 Fuel, coolant, and lubricant table
3- 6
4. Tools and tightening torques
3-8
4.1 Introduction of necessary tools
3-8
4.2 Torque list for bolts and nuts
3-9
5. Periodic replacement of critical parts
3-10
5.1 Periodic replacement interval (every 2 years)
3-10
5.2 Periodic inspection
3-10
5.3 Specified periodic replacement parts
3-11
6. Maintenance schedule chart
3-12
7. Service procedure
3-13
7.1 Outline of inspection and maintenance procedures
3-13
7.2 Initial 100 hours service
3-13
7.3 Initial 500 hours service
3-13
7.4 When required
3-14
7.5 Check before starting
3-26
7.6 Every 50 hours service
3-31
7.7 Every 250 hours service
3-31
7.8 Every 500 hours service
3-32
7.9 Every 1500 hours service
3-36
SPECIFICATIONS
4- 1
1. Dimension drawing
4- 2
2. Specifications table
4- 3