2-33
[2] STARTING ENGINE IN COLD WEATHER
When starting the engine in cold temperatures, do as follows.
1. Pull the throttle lever fully to the back and set to the high speed position.
2. Insert the key in the starting switch, turn it to the PREHEAT position and hold
it in position until the preheating indicator lamp on the control panel box lights
up. The preheating time is approx. 8 seconds.
When the key is released, it will return automatically to the OFF position.
3. When the resistor on the instrument panel glows red, turn the key to the
START position and start the engine.
4. After the engine starts, release the key.
The key will return automatically to the ON position.
To Next Page
Loading...