3-5
[7] CHECKING DRAINED OIL, FILTER
• When the oil has been changed or the filter replaced, always check the drained oil and removed filter to check for metal
particles or other foreign materials.
[8] SETTING UP WARNING SIGNS
• When the oil or coolant has been drained, put warning signs (Part No.: 1-41010-1210) in the operator's compartment to
prevent anyone from starting the engine by mistake.
[9] PRECAUTIONS WHEN WASHING PARTS
• When washing parts, use a non-flammable washing agent or diesel oil.
When using diesel oil, do not bring lighted cigarettes or cigarette lighters close.
[10] PRECAUTIONS WHEN INSTALLING PARTS
• When O-rings, gaskets, or other seals are used for the mounting surface, clean the mounting surface and always replace the
seal with a new part.
[11] PRECAUTIONS WHEN CARRYING OUT INSPECTION AND MAINTENANCE OF A MACHINE AFTER
OPERATIONS IN DUSTY AREAS
• Check carefully for clogging of the air cleaner, and clean the air cleaner element more frequently.
• Clean the radiator core, oil cooler core and inter cooler core more frequently to prevent clogging.
• Replace the fuel filter more frequently.
• Clean electrical parts carefully (in particular, the starting motor or alternator) to prevent dust from collecting.
[12] PRECAUTIONS WHEN CARRYING OUT INSPECTION AND MAINTENANCE ON MACHINES BEFORE
STARTING OPERATIONS IN SWAMPY AREAS, RAIN, RIVERBEDS, OR SNOW
• Before starting operations, check that the drain plug under the engine and the greasing plugs for the track rollers are securely
tightened.
• After completion of operations, wash the machine carefully and check for cracks and damage, and for loose or missing nuts
and bolts.
To Next Page
Loading...