SYSTEM SETTINGS
SECTION 4
29
Accessing Configuration Menus
The configuration pages define all operational conditions that do not change on a daily or patient-to-patient basis.
Once you set these default conditions, you will rarely need to use the configuration screens again. To access the
configuration menus:
1. Select MORE from real-time ECG view.
2. Select CONFIG.
3. Select 1 to print the configuration settings.
4. Select 2 to enter the Modify Configuration menu.
5. Use ▲ and ▼ to move back and forth through each row. Use ► to select the setting. Use PAGE to
advance to the next page of settings.
6. Select DONE to save any changes and exit the Modify Configuration menu. Select DONE to return to
real-time ECG view.
To Next Page
