Mosa Magic Weld 200 - Introduction; Foreword; Supplied Documentation

1
1. Introduction
1. Introduction
1.1 Foreword
ThismanualsuppliestheOperatorandqualiedandauthorisedTechnicianswithtechnicalinformationonthe
"MAGIC WELD" 200 and “MAGIC WELD” 250 engine driven welders set (hereinafter also referred to as the
"machine") produced by MOSA Div. of BCS S.p.A. (hereinafter also referred to as the "manufacturer").
Inthismanual,theOperatorinchargeandthequaliedTechnicianswillndtheindicationsfor:
• Getting familiar with the safety measures and basic standards to be adopted, to prevent hazards and
damage to people, to the engine driven welder and to the environment.
• Getting to know the main components of the engine driven welder and its operation.
• Performing the programmed routine maintenance.
• Getting to know any extraordinary maintenance operation.
This manual is an integral part of the engine driven welder and must follow it in any changes of ownership,
untilthenaldismantling.
The manual and all the publications attached to it must be kept with care, in an easily accessible place,
knowntotheoperatorandtothequaliedtechniciansauthorizedformaintenance.Readthedescriptions
carefully before starting to work or carrying out the required adjustments or maintenance.
If the manual is lost, damaged or becomes illegible, request a copy to MOSA, indicating the model of the
engine driven welder, the serial number and the year of construction.
If the engine driven welder is transferred, the transferor must deliver this manual to the new owner.
The engine driven welder is subject to updates to improve its performance; this manual summarises the
information regarding the current state of technology at the moment of the supply.
MOSAreservestherighttomakeimprovementsandmodicationstopartsandaccessories,withoutprompt-
ly updating this manual, except in exceptional cases of fundamental integrations concerning safe operation.
CAUTION
• Improper use or maintenance can cause serious damage to people and shorten the "useful
life" of the engine driven welder.
• The Operator and the qualied Technicians must be familiar with all the indications given in
this manual before using the engine driven welder or carrying out maintenance operations on
it.
• The procedures contained in this manual are intended to be applicable to engine driven weld-
ers only for permitted uses, and with all safety devices in function.
If the engine driven welder is used for purposes other than those indicated or in safety condi-
tions other than those indicated, the Customer becomes directly responsible for any person
possibly involved in accidents or injuries and for abnormal wear and tear of the machine.
1.2 Supplied documentation
The documentation supplied with the engine driven welder includes this Use and Maintenance Manual and
the main component manuals (e.g. engine).