Motorola 3

These lists must be preprogrammed by a qualified radio
technician.
Viewing a Scan List
1
or to ScnL and press the Menu Select button
directly below ScnL.
2
or to view the members on the list.
3
Press to exit the current display and return to
the Home screen.
Editing the Scan List
This feature lets you change scan list members and
priorities.
1
Perform one of the following actions:
• Long press the preprogrammed Scan List
Programming button (side button).
• Move the preprogrammed Scan List
Programming switch to programming position.
• or to ScnL then press the Menu Select
button directly below ScnL.
The display shows the lists that can be changed.
2
or to the entry you want to edit.
3
Perform one of the following actions:
• Press the Menu Select button directly below Sel
to add and/or change the priority of the currently
displayed channel in the scan list.
• Press the Menu Select button directly below Del
to delete the currently displayed channel from the
scan list.
• Press the Menu Select button directly below Rcl
to view the next member of the scan list.
4
Perform one of the following actions to select
another channel that needs to be added or deleted
then repeat step step 3. Otherwise, proceed to the
next step.
• or to the desired channel.
• Use the keypad to enter the desired channel
name.
English
Send Feedback 95
Draft