volume of loudness depends on the maximum tone at
your radio profile.
1 Press the Emergency button to enter Emergency
Mode.
You hear the Emergency Beacon.
2 Press PTT button to make an Emergency Call.
3 Release to listen.
You hear Emergency Call De-Key Sidetone. After a
short pause, you hear Emergency Beacon.
4 Long press Emergency button to exit Emergency
mode and cancel Emergency Beacon.
Man Down
Man Down condition is determined based upon the radio tilt
angle or a combination of radio tilt angle and the lack of
radio motion.
Man Down feature is an alternate way to activate the
Emergency feature if Emergency has been programmed in
your radio.
NOTICE:
This feature could be preprogrammed for all
channels that support Emergency feature or could
be preprogrammed specifically to a zone and
channel which has Emergency feature. Consult your
agent or qualified technician for more details.
Your radio automatically activates Emergency Alarm or Call
when the radio achieves or passes a tilt angle threshold or
a combination of the angle threshold and radio motion
below the motion sensitivity level, depending upon how the
radio is programmed. The radio must stay in this condition
for a preprogrammed amount of time before the
Emergency Alarm or Call is activated.
NOTICE:
It is recommended that an Emergency button is
preprogrammed in order to allow the user to exit the
emergency condition.
The Man Down feature provides a Clear function to the
user. After a Man Down condition has been detected, the
user can press a preprogrammed Clear button to cancel
the Man Down condition. The radio remains in the Man
Down state without triggering an emergency condition until
the radio is moved out of the Man Down state, at which
point Man Down functionality resumes.
The Man Down feature has three phases:
English
70
To Next Page
Loading...
