Motorola APX 8000XE 1 - Selecting Secure Transmissions; Selecting Clear Transmissions

NOTICE:
The user can automatically enter the encrypted
environment by default without having to manually
select or clear the secure transmission. This
extended feature can only be enabled through CPS
configuration.
Selecting Secure Transmissions
Turn the preprogrammed Secure/Clear switch to the
secure position.
• If the selected channel is preprogrammed for
clear-only operation, when you press the PTT
button, you hear an invalid mode tone and the
display shows CLR TX.
• The radio does not transmit until you set the
Secure/Clear switch to the clear position.
• If the “Ignore Secure/Clear Switch when
Strapped” programming option is enabled, the
radio transmits without displaying any messages
in the strapped mode of operation, regardless of
the Secure/Clear switch setting. This option must
be preprogrammed by a qualified radio
technician.
• The Secure/Clear switch only applies when the
radio is transmitting.
Selecting Clear Transmissions
Turn the preprogrammed Secure/Clear switch to the
clear position.
• If the selected channel is preprogrammed for
secure-only operation, when you press the PTT
button, you hear an invalid mode tone and the
display shows SEC TX.
• The radio does not transmit until you set the
Secure/ Clear switch to the secure position.
• You can request to configure the radio to ignore
the clear voice or insecured transmission when
the radio is in secured transmission. Check with
your agent for details.
• If the “Ignore Secure/Clear Switch when
Strapped” programming option is enabled, the
radio transmits without displaying any messages
in the strapped mode of operation, regardless of
the Secure/Clear switch setting. This option must
be preprogrammed by a qualified radio
technician.
English
75