Mission Critical Wireless -
Bluetooth
®
This feature allows your radio to extend its functionality by
connecting to external proprietary Motorola Solutions
accessories.
It is recommended to use Motorola Solutions proprietary
Mission Critical Wireless (MCW) devices with APX radios
during Mission Critical operations as other Bluetooth
devices may or may not meet the mission critical standard.
Your radio must be preprogrammed to allow you to use this
feature.
The use of this feature requires the "Full Feature"
expansion board together with the Bluetooth Software.
The default setting for Bluetooth-enabled radio is Bluetooth
on. See Turning Off the Bluetooth on page 84 to turn off
the Bluetooth.
Currently your radio supports the following Bluetooth
devices or profiles.
• Headset (HSP)
• Dial Up Networking (DUN)
• Personal Area Networking (PAN)
• Serial Port (SPP)
• Generic Access Profile (GAP)
• General Attribute Profile (GATT)
Turning On Bluetooth
• Turning on the Bluetooth using the preprogrammed
button:
a. Press the preprogrammed button to turn on the
Bluetooth.
You hear a short, medium-pitched tone. The
display shows momentarily BT ON, and
appears.
If Bluetooth fails to launch, the display shows BT
ON FL.
Turning Off the Bluetooth
• Turning off the Bluetooth using the preprogrammed
button:
English
84
To Next Page
Loading...
