Motorola ASTRO XTS 5000 I - Radio Information; Reference Oscillator Alignment

1
Introduction
1
General This manual covers information needed for levels one and two
troubleshooting. Level one troubleshooting consists of radio
programming, radio alignment, knobs replacement, and installation
and removal of antenna, belt clip, battery, and universal connector
cover. Level two troubleshooting covers disassembly and reassembly of
the radio to replace circuit boards.
Included in this manual are radio specifications for the 764-870 MHz
frequency band, a general description of XTS 5000 models,
recommended test equipment, service aids, radio alignment
procedures, general maintenance recommendations, procedures for
assembly and disassembly, and exploded views and parts lists.
Notations Used in
This Manual
Throughout the text in this publication, you will notice the use of
warnings, cautions, and notes. These notations are used to emphasize
that safety hazards exist, and care must be taken and observed.
NOTE: An operational procedure, practice, or condition,
etc., which is essential to emphasize.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may
result in equipment damage.
!
C a u t i o n
WARNING indicates a potentially hazardous situation
which, if not avoided, could
result in death or injury.
!
W A R N I N G
!
DANGER indicates an imminently hazardous
situation which, if not avoided, will
result in death
or injury.
D A N G E R
!