39
Disassembly/Reassembly
Procedures 8
Introduction This section gives detailed procedures for disassembling/reassembling
XTS 5000 radios, and ensuring the submergibility of ruggedized radios. When
performing these procedures, refer to “Exploded Views and Parts Lists” on
page 67 and the diagrams that accompany the text. Items in parentheses ( )
refer to item numbers in the exploded view diagrams.
This section also has procedures for removing and installing the XTS 5000
radio’s standard accessories and changing the Volume and Frequency Knobs.
Antenna
Attach the
Antenna
With the radio turned off, turn the antenna clockwise to attach it to the radio.
Figure 15. Attach the antenna
Remove the
Antenna
With the radio turned off, turn the antenna counter-clockwise to remove it
from the radio.
Figure 16. Remove the antenna
To Next Page
Loading...
