Motorola ASTRO XTS 5000 I - Belt Clip; Attach the Belt Clip; Remove the Belt Clip

Performance Checks
17
11. Press the PTT Button; “1/1” appears; release, “1/0” appears.
12. Keypad Checks:
Model III Only—
- Press 0, “48/1” appears; release, “48/0” appears.
- Press 1, “49/1” appears; release, “49/0” appears.
- Press 2, “50/1” appears; release, “50/0” appears.
- Press 3, “51/1” appears; release, “51/0” appears.
- Press 4, “52/1” appears; release, “52/0” appears.
- Press 5, “53/1” appears; release, “53/0” appears.
- Press 6, “54/1” appears; release, “54/0” appears.
- Press 7, “55/1” appears; release, “55/0” appears.
- Press 8, “56/1” appears; release, “56/0” appears.
- Press 9, “57/1” appears; release, “57/0” appears.
- Press *, “58/1” appears; release, “58/0” appears.
- Press #, “59/1” appears; release, “59/0” appears.
Models II and III—
- Press V, “128/1” appears; release, “128/0” appears.
- Press h, “129/1” appears; release, “129/0” appears.
- Press U, “130/1” appears; release, “130/0” appears.
- Press D, “131/1” appears; release, “131/0” appears.
- Press E, “132/1” appears; release, “132/0” appears.
- Press F, “133/1” appears; release, “133/0” appears.
- Press @, “134/1” appears; release, “134/0” appears.
- Press X, “135/1” appears; release, “135/0” appears.
- Press Y, “136/1” appears; release, “136/0” appears.
Non-Display
Radio Test
Mode
(Model I)
Entering Non-
Display Radio Test
Mode
1. Turn the radio on.
2. Within 10 seconds after the top green LED turns off, press Side button 2
five times in succession.
3a. Press the Top Side Button to put the radio into the Control Top and
Keypad test mode. Go to “Control Top and Keypad Test Mode” on
page 18.
NOTE: Each press of the Top Side Button will toggle between
Control Top and Keypad test mode (non-display radio) and
RF test mode (non-display radio).