Motorola ASTRO XTS 5000 I - Universal Connector Cover; Remove the Universal Connector Cover; Figure 24. Remove the Belt Clip; Figure 25. Insert a Screwdriver below the Cover

Disassembly/Reassembly Procedures
42
2. Slide the belt clip upward to remove it.
Figure 24. Remove the belt clip
Universal Connector
Cover
Remove the Universal
Connector Cover
1. Insert a flat-blade screwdriver into the area between the bottom of
the cover and the slot below the connector.
Figure 25. Insert a screwdriver below the cover
2. Hold the top of the cover with your thumb while you pry the
bottom of the cover away from the radio with the screwdriver.
Figure 26. Remove the cover
Metal
Tab
When the universal connector is not in use, keep it covered
with the universal connector cover.
!
C a u t i o n