Table 1: Button Press Duration
Action Description
Press Press and release.
Long press Press and hold for one second or longer depending on the settings
through the Customer Programming Software (CPS).
2.1.1
Assignable Radio Function
You can program the programmable buttons as shortcuts to the following radio functions through Customer
Programming Software (CPS). Contact your dealer for more information.
Table 2: Types of Programmable Functions
Function Description
All Alert Tones On/Off Allows you to enable or disable the alert tones.
Emergency Off Allows you to terminate an outgoing emergency call.
Emergency On Allows you to set up an emergency call.
Power Level High//Mid/Low Allows you to toggle the transmit power level between high, medium, and
low.
Monitor
● Allows you to monitor the transmission activity of the current channel.
● Exits the monitoring mode when the button is released.
Nuisance Channel Delete Allows you to temporarily remove unwanted channels from the scan list.
One Touch Access 1–6 Allows you to initiate a one click call corresponding to the call set by the
key.
One touch access initiates the following features for analog and digital
radio.
Analog
DTMF-1–DTMF-4
Digital
Call Alert, Radio Check, Radio Disable, Radio Enable, and Remote
Monitor
Repeater/Talkaround Allows you to switch between using a repeater and communicating directly
with another radio.
Scan On/Off Allows you to turn on or off the channel scanning feature.
Squelch Level Tight/Nor-
mal/Loose
Allows you to toggle the squelch level between tight, normal, and loose.
Scramble On/Off Allows you to toggle scrambling on or off.
VOX On/Off Allows you to toggle VOX on or off.
Zone Toggle Allows you to switch between zones.
Battery Indicator Allows you to indicate battery strength by using voice prompt.
Lone Worker On/Off Allows you to enable or disable the emergency prompts if there has been
no user activity for a predefined time.
MN010576A01-AA
Chapter 2: Radio Overview
10
To Next Page
Loading...
