Function Description
RX Noise Cancellation Allows you to turn on and off the receiving noise cancellation feature.
TX Noise Cancellation Allows you to turn on and off the transmitting noise cancellation feature.
Enhanced Audio Power
On/Off
Allows you to turn on and off the enhanced audio power setting for the
current channel. The speaker is set to operate at the highest speaker
power limit when enhanced audio power is turned on.
Sticky Monitor On/off Allows you to monitor a selected channel for all radio traffic until function is
disabled.
Battery Saver On/Off Allows you to enable or disable the battery saver feature.
2.2
Radio LED Indications
The LED Indicator shows the operational status of your radio. A qualified technician can permanently disable
the LED indication through a specific configuration.
Table 3: LED Indication
Indication Status
Solid Red The radio is transmitting.
Solid Green The radio is receiving a signal.
Blinking Green The radio is scanning.
Blinking Red The battery capacity is low.
Solid White The radio is charging through USB-C. LED turns off when USB-C charg-
ing completes.
Blinking White USB-C charging fault.
MN010576A01-AA
Chapter 2: Radio Overview
11
To Next Page