Motorola CP040

2-6 MAINTENANCE
6.2 Dust Cover Disassembly
a. Gently pry the top of the dust cover away from the body of the radio (Figure 2.4).
b. Rotate the dust cover 90° in a counter clockwise direction to allow the key to be
removed.
c. Separate the dust cover away from the body of the radio. The dust cover key is fragile;
apply only light pressure to the key while removing the dust cover.
Figure 2-4 Dust Cover Removal
6.3 Speaker Disassembly
1. Remove the two screws from the speaker retainer using a T6 Torx screwdriver.
2. Lift the speaker out from the front housing.
NOTE:
The speaker is held in place with a retainer bracket. Be careful not to damage the speaker
when removing the retainer bracket.
Figure 2-5 Removal Speaker-Microphone Assembly
key
c. Separate dust
cover from body.
b. Rotate dust cover 90° to
a. Pry dust cover from body.
allow key to be removed.
Retainer Bracket
Speaker
Radio Housing
Wire Connector