Motorola CP040

Chapter 4
RADIO TUNING AND PROGRAMMING
1.0 Introduction
This chapter provides an overview of the Customer Programming Software (CPS) and tuner
program designed for use in a Windows 98/ME/NT/2000/XP environment. A CPS/Tuner Installation
Manual (6866549D08) is included in this Product Manual.
2.0 CPS Programming/Flashing Setup with RIB
A Windows 98/NT4/2000/ME/XP PC (personal computer) and Global Tuner are required to tune the
radio. To perform the tuning procedures, the radio must be connected to the PC, RIB (Radio Interface
Box) and Universal Test Set as shown in Figure 4-1, Radio Tuning Setup, below. Refer to online help
files for the tuning procedures.
Figure 4-1. Radio Tuning Setup
Service Monitor or
Counter
Wattmeter
Audio Generator
Sinad Meter
AC Voltmeter
30 dB Pad
30 dB Pad
Battery
Eliminator
Power
Supply
Audio In
Tx
Rx
Receive
Transmit
RF Generator
BNC
RF Adaptor
5886564Z01
RIB
RLN4008
RIB Power Supply
RLN4460
Te s t B o x
Rx
Gnd
Data
Tx Data
Radio
Computer Interface
Cable
Program/
Test Cable
PMKN4004
RLN4510
Power Cable