Radio Disassembly - Detailed 2-7
6.4 PTT Disassembly
1. If required, the PTT (Figure 2-6) can be disassembled using a small screwdriver, as follows:
a. Insert the tip of a small screwdriver underneath the PTT and unsnap the top tab.
b. Pry the PTT away from the radio housing.
c. Inspect the two hooks. If bent or broken, the PTT must be replaced.
d. Remove the PTT seal.
Figure 2-6 PTT Removal
Flat Blade
Screwdriver
PTT Seal
Ta b
Ta b
Hooks
To Next Page
Loading...
