Motorola edge 20 pro - Quickly Tighten Lock Screen Security; Adjust Screen Lock Options

Tips:
•
You can swipe up from anywhere on the screen when unlocking. You don't need to touch the
icon.
•
Some of these options aren't available if you added a VPN or a work (corporate) email account to
your phone.
Remove screen lock
1. Go to Settings > Security & privacy.
2. Touch Device lock.
3. Touch Screen lock.
4. Enter your current PIN, password, or pattern to confirm your identity.
5. Select None or Swipe.
Quickly tighten lock screen security
Unlocking with the fingerprint sensor and setting up automatic unlocking make it easier to keep your phone
secure and minimize when you need to enter your PIN, pattern, or password. But sometimes you need to
trade convenience for more security. You can temporarily tighten locks and prevent lock screen
notifications.
1.
Swipe down twice from the top of the screen, then touch > Power off.
Or, press & hold the Power button, then touch Power off.
2. Touch Lockdown.
Your fingerprint sensor and automatic unlock settings are disabled and notifications won’t be displayed
on your lock screen.
3. To exit Lockdown, unlock your phone with your PIN, pattern, or password.
Adjust screen lock options
Use these options to control when your phone locks and whether your code is visible when you unlock. (You
can also control what content is included on your lock screen.)
Set time before locking
Unless kept unlocked automatically, your phone locks the screen five seconds after the screen turns off.
To increase or decrease the amount of time before automatically locking the screen:
1.
Open the Moto Secure app and touch Security & privacy.
Or, go to Settings > Security & privacy.
2. Touch Device lock.
3.
Next to Screen lock, touch .
Settings : Security & privacy : Lock and unlock phone
190