3-24 Service Aids
3.12 Service Aids
The recommended service aids for the EX500, EX600 and EX600•XLS radios are listed in Table 3-3.
While all of these items are available from Motorola, most are standard shop equipment items and
any equivalent item capable of the same performance may be substituted for the item listed.
29 See Chapter 8 RF Board (must order back cover kit)
30 7580556Z01 Thermal Pad
31 3280534Z01 Battery Module Seal
32 1485673Z01 Antenna Nut Insulator
33 3285892Z01 Main O-Ring
34 2786154Z01 Chassis
Table 3-3 Service Aids
Motorola Part
No.
Description Application
RLN4460 Portable Test Set Enables connection to the audio/accessory jack.
Allows switching for radio testing.
H5177 Customer Programming Soft-
ware - Software on CD ROM
Used to program customer option and channel data.
AAJMKN4123 Programming Cable/Test Cable Connects the radio to the RIB (RLN4008).
AAJMKN4124 Radio-to-Radio Cloning Cable Allows data from a master radio to be duplicated by
copying programmed data from the master radio to
another compatible radio.
RLN4008 Radio Interface Box (RIB) Enables communications between the radio and the
computer’s serial communications adapter.
AAJMKN4125 Battery Eliminator Connects to radio via battery eliminator cable.
HHLN4134A BNC Adaptor Adapts radio’s antenna port to BNC cabling of test
equipment.
8180384M30 Housing Eliminator Interconnects radio to power supply. Provides for
troubleshooting of the radio when the housing is
removed.
0180357A57 Wall-Mounted Power Supply Used to supply power to the RIB (120 VAC).
3080369B71
or
3080369B72
Computer Interface Cable Use B72 for the IBM PC AT. Use B71 for all other
IBM models. Connects the computer’s serial com-
munications adapter to the RIB (RLN4008).
6680702Z01 Chassis/Knob Opener Used to remove and replace surface mount devices.
Item
Motorola Part
Number
Description
To Next Page
Loading...
