38
English
PASSPORT
TRUNKING
PTT ID ALIAS
Your HT1250•LS+
radio supports the display of
the Alias of the calling radio when receiving a
group dispatch call in PassPort mode. This
Alias corresponds to the MIN of the calling
radio in the Radio Call List.
Note: Alias will be displayed only if
preprogrammed in the radio via the
PassPort Customer Programming
Software (PPCPS). Otherwise, the
MIN is displayed.
ROAM REQUEST
Because of the RSSI feature, the HT1250•LS+
radio automatically roams to an affiliated site
when the signal from the registered site
becomes too weak for quality communication.
This RSSI threshold is programmed by your
dealer. However, if you believe the signal
strength would be better on another site, you
may want to manually initiate the roaming
process. This feature is called Roam Request.
To Start a Roam Request
The display indicates
the Home Site ID
(HSID) and Mobile
Identification Num-
ber. (MIN) XXX indi-
cates the ASID,
YYYYY indicates the
MIN.
Note: This message can still be activated
even if the radio is not registered.
,$0;;;-<<<<<
1
Press the preprogrammed Roam Request
button (see page 16).
You see:
2
When the radio is
searching for a new
site or attempting
registration to a site,
you see:
5RDP5HTXHVW
6($5&+,1*