6
English
5. If an IMPRES battery is used with a display radio (e.g. XTS5000),
the radio may display an icon indicating the charge status of the
battery. This icon is enabled after an IMPRES battery has
beencalibrated in an IMPRES charger. The charger status icon will
remain displayed as long as the user continues to use IMPRES
chargers to charge the batteries. However, if an IMPRES battery is
charged in a non-IMPRES charger for a period of 7 days (or more),
the icon will disappear. To re-enable the icon, insert an IMPRES
battery into an IMPRES charger and allow it to complete the
charging process (resulting in a STEADY GREEN indication). The
charge status icon will then be displayed on the radio. If the icon
does not appear after a full charge, place a partially discharged
battery (at least 70% discharged) into the charger, initiate a
reconditioning, and allow it to complete the charging process. The
icon will then appear on the radio display (not applicable to GP
Professional Series radios).
6. The IMPRES Adaptive Multi-Unit Charger can only be repaired by a
qualified service technician authorized by Motorola CGISS. Any
violation of this policy can void unit warranty.
BATTERY LISTS
The following tables list the batteries that can be used with the specific
subscriber radios identified in the table headings.
Table 1. ASTRO XTS3000 / XTS3500 / DiMetra Series Radios
& ASTRO XTS5000 Digital Radio
Kit (PN) Chemistry HazLoc Smart Capacity New Model
HNN9031 NiCD No Yes Ultra High No
HNN9032 NiCD FM Yes Ultra High No
NTN8294 NiCD No No Ultra High No
NTN8295 NiCD FM No Ultra High No
NTN8297 NiCD FM No Ultra High No
NTN8299 NiCD FM No Ultra High No
NTN8610 Li-Ion No No High No
NTN8293 NiMH No No Ultra High No
NNTN4435 NiMH No Yes Ultra High No
NNTN4436 NiMH FM Yes Ultra High No
NNTN4437 NiMH FM Yes Ultra High No
RNN4006 NiMH No No Very High New
RNN4007 NIMH FM No Very High New
NTN9862 Li-Ion No Yes Ultra High New
6866537D22.book Page 6 Wednesday, March 23, 2016 12:53 PM
To Next Page
Loading...
Need help?
General
