Motorola IT.6.1T - Using the Phone; Basic Handset and Call Operations

22
Using the phone
4. Using the phone
NOTE
Your handset will automatically time the duration of all external calls, the
call timer will display on the screen. When the call ends, the total duration of
your talk time is shown for 3 seconds.
4.1 Switch the handset on / off
Pressandhold toswitchthehandsetonoroff.
4.2 Calls
OnceyouhavepairedyourIT.6Twithyourmobile,youcanmakecallsover
thehomelineormobilenetworkusingtheIT.6Thandset,topairtheIT.6T
withyourmobile,seepage19.
4.2.1 Make a call
1. Press
. Home ishighlighted.
2. Scrolltothelineyouwanttouseandpress
OK .
3. Whenyouhearthedialtone,dialthenumber.
NOTE
If you choose Mobile 1 or Mobile 2 and no mobile is paired the handset will
return to standby.
4.2.2 Preparatory dialling
1. Dialthenumberrst.Ifyoumakeamistakepress
Clear todeletethelast
digit.
2. Scrollto
, or .
3. Press
todial.
NOTE
To enter a pause (P) when pre-dialling, see page 28.
4.2.3 Make a call using quickdial keys
1. Pressandholdtherelevantkeypadnumbertodialthepre-storednumber
directly.
NOTE
To assign a quickdial number, see page 31
4.2.4 End a call
Press
,orplacethehandsetbackonthebaseorcharger.
4.2.5 Receive a call from the home line
Whenyoureceiveanexternalcall,thephoneringsandanavatarshowson
thedisplay.