Option Power Solution Description Requirements
● Low-voltage power system.
DC Power Cable does not pro-
vide a plug, installation requires
splicing of DC+ and DC- wires.
Internal Camera Batteries Only Two Li-Ion Internal Camera Bat-
teries:
● Included with every L6Q
camera.
● 3.7V/5,000 mAh for each
battery
● Lasts up to 3,000 license
plate scans.
● Quick-swap battery tray.
Battery tray or individual batter-
ies must be manually swapped
when depleted.
Camera mounting location must
be easily accessible.
Table 5: Solar Panel Kit Use Cases
Kit Use Case
Solar Panel Kit Recommended for sites with direct sunlight that
preclude the installation or use AC/DC power facili-
ties.
Expansion Solar Panel Kit Recommended for sites with lower or partial sun
conditions that benefit from extra solar panel sur-
face area.
Expansion Solar Panel Battery Kit Recommended for single panel deployments with
high traffic volume that benefit from extra battery
capacity to offset higher power usage by the cam-
era. Or, for required installation on a second solar
panel in dual panel deployments.
1.2
Components and Installation Tools
The components, tools, and items required for installation vary depending on installation site characteristics
and options selected during ordering. All installations require at least a mobile phone and a measuring
tool.
Included
The installation kit includes all of the components and hardware necessary to mount and charge the camera.
Additional add-ons may also be present, depending on the options selected during ordering. For information
about solar power options, see Solar Panel Deployment Kits.
MN010089A01-AD
Chapter 1: L6Q Camera System Overview
12
To Next Page
Loading...
Need help?
General
