EasyManuals Logo

Motorola MCS 2000 II User Manual

Motorola MCS 2000 II
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
page 12
MCS 2000 Models II & III 68P81083C49-B
External Alarm
Depending on the accessories ordered and installed
with your radio the external alarm function activates
the vehicle horn or lights if you do not respond to a
call (Page, Trunking Private Call, or Trunking Phone
Call) before a pre-programmed time.
Press button (6) or select
HORN/LIGHTS
via the
menu to turn the external alarm on. “HORN/LIGHTS
ON” alternates on the display to indicate the feature is
active. Turn the alarm off by pressing button (6) again
or via the menu.
Handset Operation
To select Handset operation, select
HANDSET
from
the menu and select HANDSET ON. When HANDSET
ON is selected and the handset is removed from the
Hang up box (HUB) audio will be heard only through
the handset speaker and the radio speaker will be
muted for privacy.
When the handset is placed in the HUB, or when
HANDSET OFF is selected from the menu, audio will
be heard through the radio speaker.
Car Radio Mute
If the car radio mute feature is programmed into your
MCS 2000, your standard car radio will momentarily
mute when your MCS 2000 mobile radio is transmit-
ting or receiving. Please contact the person in charge
of your radio system for further information.
Failsoft
The failsoft feature ensures that a conversation is not
interrupted if the trunked system fails. In this mode
communication will be maintained on an open chan-
nel. The failsoft tone will sound every 10 seconds and
the display will alternate between
model III model II
and the current active display.
Conventional Functions
Before transmitting, always make sure that the
selected mode is free (Orange LED not on).
Repeater/Direct
Select the menu
REPEAT/DIRECT
as previously
described or press a preprogrammed button. The cur-
rent mode (direct or repeater) will be displayed. Use the
mode selector (D) to toggle the mode. Press the select
button (13) to select the displayed mode of operation.
FAILSOFT
SOUTH DIVISION
FAILSOFT
MCS2000 2&3-C UG GB (for US) Page 12 Monday, December 8, 1997 4:21 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola MCS 2000 II and is the answer not in the manual?

Motorola MCS 2000 II Specifications

General IconGeneral
BrandMotorola
ModelMCS 2000 II
CategoryRadio
LanguageEnglish

Related product manuals