MCS 2000 Models II & III 68P81083C49-B
page 9
and the home display. Line two in the model III display
indicates the ID of the calling party, for model II press
the call button (12) to view it.
The green indicator (B) and the call received icon
flash.
If the PTT (F) is pressed within 20 seconds, the call is
answered and a private conversation can go ahead.
Note
: If the call button (12) is not pressed, the
call will be initiated as a talkgroup call.
Press the HOME button (3) (or the menu button (9) twice)
or the call button (12) when the conversation is over.
Sending a Private Call (trunking only)
Private calls can be selected either from a list or
directly via the keypad (model III or model II with
optional keypad microphone).
Note: If your radio has been so programmed, you can
press the call button for quick access to the Private
Call function. Using the mode selector (D), you can
scroll between last received ID, Private Call lists and
your own radio ID.
Press the call button (12) or select
CALL
through the
menus.
The display shows the last ID transmitted or received.
List Selection:
Transmit to the displayed ID by pressing the PTT (F) or
choose another ID from the list by using the mode
selector (D).
To view the radio's own ID, use the mode selector (D)
until the display shows “MY ID:” followed by the
radio's ID, e.g.:
model III model II
Keypad Selection:
(model III or model II with optional keypad micro-
phone)
Press the call button (12) or select
PRIVATE CALL
through the menus and enter the desired ID directly
from the keypad.
If an incorrect number is entered the digits may be
erased by using the mode selector (D) to the left/
down. Continue using the mode (D) to the left/down to
erase the entire ID. Then enter the correct ID.
To Next Page
Loading...
Need help?
General