Motorola MTM800E - New Message Creation and Sending

147
The Menu
To set up your operating mode:
1. From the main menu, select More... > Network > Trunked
Mode.
2. The MTM800E switches to Trunked Mode.
Selecting Direct Mode
This sub-menu allows you to select the
mode your MTM800E will be operating
on.
To set up your operating mode:
1. From the main menu, select More...
> Networks > Direct Mode.
2. The MTM800E switches to Direct Mode.
Setting Transmit Inhibit (TXI) Mode
This mode should always be set before
entering areas where transmission is
prohibited, e.g. in hospitals or in
potentially explosive areas.
To activate the TXI Mode:
1. From the main menu, select More...
> Networks > TXI Mode.
2. Select Activate.
The MTM800E will sound the “Transmit Inhibit” tone. The dis-
play shows TXI Mode in the first row
, and the solid amber
LED indicates the TXI Mode.
It is not possible to switch from Direct Mode to Trunked Mode,
if the MTM800E is in Transmit Inhibit Mode.
It is not possible to switch from Direct Mode to Trunked Mode, if
the MTM800E is in Transmit Inhibit Mode.
All menu items which cause transmitting are blocked in TXI
Mode. It is not possible to change the group.
Back
Select
Networks Sel
Trunked Mode
Direct Mode
TXI Mode
Networks
Back
Select
Activate
Deactivate
TXI Mode