152
You are allowed to edit your messages before sending them.
You can send a message when the terminal is idle or during a
Group/Emergency/Broadcast Call (if configured).
If configured, a message will alert you of an incoming Group/
Emergency/Broadcast call, of your joining it, or of its end.
Sending a text message during a Group Call (if configured)
Press . One of the following might occur:
• The call started before message editing began. The
terminal will leave the call and send the message. If the
call is still active, the terminal will re-join it.
• The call started after message editing began. The terminal
will leave the call and send the message. The terminal will
return to the edit screen.
• The call started before or after message editing began.
The terminal will send the message while staying in the
call.
Sending a text message during Emergency/Broadcast Call
(if configured)
Press . One of the following might occur:
• The call started before message editing began. The
terminal will leave the call and send the message. The
terminal will return to the edit screen.
• The call started after message editing began. The terminal
will send the message while staying in the call.
Entering the Messages Sub-menu
From the main menu, select Messages.
In DMO text messages are sent on the frequency of the current
talkgroup. Make sure you select the desired talkgroup before
sending a message. For selecting group details see “Selecting a
Group” on page 36.
To Next Page
Loading...
