29
Full-duplex Private PPC Received
Broadcast Call
The Broadcast Group Call (also called
Site Wide Call) is a high-priority group
call from the console operator (or
dispatcher) to all users located at one or
more sites. The terminals are configured
to monitor a Broadcast Call, but the
users cannot talk back.
The call can be received as normal
Broadcast Call or Emergency Broadcast
Call.
The Broadcast Call pre-empts an on-
going Group Call that has the same (or
lower) call priority.
For selecting a talkgroup during a broadcast call, see
Selecting a Group” on page 36.. For changing folder during a
broadcast call, see Selecting a Folder” on page 39..
Ambience Listening (AL)
This feature, if enabled by your Service Provider, allows a
console operator (or dispatcher) to establish a special call
with a specific terminal to monitor voice activity in the local
vicinity. The call is setup without any indication to the affected
terminal, and any lower priority ongoing voice call or packet
data transfer may be pre-empted.
<Any> in Use
Prvt Priority
David
2234
Spkr
Mute
Press
any key
Priority
Prvt in Use
David
Spkr
Mute
Group in Use
ID:David
Broadcast
Folder
Optns
Emgcy in Use
ID:David
Broadcast
Folder
Optns
To Next Page
Loading...
