135
> To set a priority to a group, scroll through the priority
list: high, medium, or low.
A call from a high priority group will interrupt an on-
going call with a medium and low priority.
A call from a medium priority group will interrupt an
on-going call with a low priority.
A call from a low priority group will not interrupt any
on-going call.
• Edit
the scan list groups.
> Scroll to the group you wish to remove from the
selected scan list, press Menu and press Delete. You
will be prompted to remove the selected group. After
a few seconds, the display shows the updated scan
list.
> To change the group priority, press Priority. Scroll to
the selected priority and press Select.
My Groups (TMO/DMO)
This sub-menu allows you to select/edit
your favorite group list.
Adding a Group
1. From the main menu, select More... > Group Setup > My
Groups > <FolderName> > [New Group].
2. Select a group by folder search (“TMO/DMO by Folder”).
Select the folder and select the group. The group is added
to the “My Groups” folder. OR, select a group by alphabetic
search (“TMO/DMO by abc”). You can enter up to 12 letters
of the group’s name.
Back
Select
[New Folder]
My Groups
My Groups
To Next Page
Loading...
